Peel Ply A100 ECO
A100 ECO is a Porous Nylon PA56 peel ply, sustainably produced from renewable sources such as corn and wheat, which results in a 50% reduction in greenhouse gas emissions compared to petroleum-based polyamide. Recommended for composite manufacture and metal bonding applications, this peel ply is heat set and scoured, for use directly against laminates or bond lines. It strips cleanly and quickly from most commercial resin systems and leaves a course weave pattern on the laminate upon removal. Available in solid white, or white with a red tracer. Slit widths are available.
FEATURES OF PEEL PLY A100 ECO
- Sustainably produced from renewable sources.
- Imparts a coarse weave pattern.
- Heat set and scoured.
- Strips cleanly and quickly.
Aerovac does not recommend the use of woven nylon fabrics with phenolic resin or prepreg systems, as acid in the catalyst can break down nylon materials. Therefore, we recommend that customers conduct their own internal compatibility tests.
Max Use Temperature
204°C (400°F)
Color
A100 ECO: White | A100PS ECO: White with red tracer
Fiber
Nylon (PA56)
Weight
85g/m² | 2.51oz/yd²
No special storage conditions required, however we recommend the product be stored in its original packaging. Please refer to the product SDS for safe handling, personal protective equipment recommendations and disposal considerations.
If you would like to request a quote for additional products, please utilize our main Quote Request Form.
DISCLAIMER: The data and information provided on this page have been obtained from carefully controlled samples and are considered to be representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a specific use or purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to change any data or information when deemed appropriate. All trademarks are the property of their respective owners. ©2023 Aerovac LLC. All rights reserved.
